成都和泰升降机械有限公司
客户统一咨询热线
189-0831-8192
邮箱:jnhetai@163.com
地址:成都市经济技术开发区成龙大道一段177号
文章来源:www.jnjbrpt.com 发布时间:2023-01-04 14:17:53 浏览次数:190
升降平台的台面在升到二楼的过程当中有不对程序,针对这个问题,通过勘察发现,主要是因为导轨进行了拼接,而且安装的过程中拼接的接头没有接好,导致了浙江升降平台在升降到二楼会由于导轨轮走到拼接的地方,会出现异响这种情况。
The counter of the lifting platform is Zhejiang in the ascending to the program is not on the second floor of the process, in order to solve this problem, through the survey found, mainly because of the guide of splicing, and installed in the process of stitching joint is not connected, resulting in the Zhejiang lifting platform on the lifting to the second floor due to the guide rail wheel went to the splicing place, there will be abnormal sound.
金臂人升降机械的专家建议大家在升降平台安装的过程中尽可能保证导轨的垂直度,在导轨拼接的时候心要以不要焊接导轨轮的一侧,要焊接其他三个面。如果客户要求把三个面全部焊接的话,焊接完成后用打磨机进行平整面的打摸,保证在导轨轮升降的过程中不出现类似的异响。
Man with the golden arm lifting machinery experts recommend in Zhejiang lifting platform installation process as far as possible to ensure that the guideways perpendicularity, when rail mosaic heart to to not welded rail wheel side, to be welded to the other three. If the customer requires all three surface welding, welding is completed with the polishing machine for the smooth surface of the touch, to ensure that in the course of the lifting of the track wheel does not appear similar abnormal sound.
升降平台结构尺寸越大,结构就越结实,但是尺寸越大,浙江升降平台的轿厢就越大,重量也越大。由于浙江升降平台的电动机功率是一定的,因此,浙江升降平台的载荷就要减少。考虑到轿厢上横梁是钢丝绳与轿厢的结合处,而且受到的是弯曲应力,所以上横梁是轿厢...
TIME:2023-01-04